MC8207 Home Theater Amplifier

MC8207 ELECTRONIC SPECIFICATIONS
Power Output per Channel:200W @ 4 or 8 Ohms
Number of Channels:
– 7 (can also be used as a 2-zone amplifier with 5 channels in zone A and 2 channels in zone B)
Total Harmonic Distortion:0.005%
S/N below rated output:112dB
Dynamic Headroom:1.7dB
Damping Factor:>140
Rated Power Band:20Hz to 20kHz
Frequency Response:
+0, -0.25dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz

CONTROL
Remote Power Control: Yes, 7 or 5 + 2 Channel
Multi-Channel DB25 Cable: N/A

GENERAL SPECIFICATIONS
Circuit Configuration: Push-Pull Complementary
Circuit Design: Solid State
Mono Bridge: No
Mono Parallel: No
Output Type:
– Direct Coupled with Dynamic Power Manager®
Meters: Yes, new style LED
Meter Light Switch: No
Balanced Input: Yes
Front Panel: Glass
Illumination: LED Fiber Optic
Chassis Style: Inverted

CONNECTIVITY
Speaker Binding Post Type: Yes

WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D):
– 17-1/2″ (44.5cm) x 9-7/16″ (23.9cm) (including feet) x 21″ (53.3cm) (including front panel and cables)
Unit Weight: 83 lbs (37.6 kg)
Shipping Weight: 116 lbs (52.6 kg)

– With the MPC1500 Power Controller, you can provide clean, consistent power to your home audio system, enabling it to deliver its best possible sonic performance.
– At the heart of the MPC1500 is a large toroidal isolation transformer that has been specially wound to act as a low pass filter to remove unwanted noise from the AC line.
– Also employs a quick-acting surge suppression module that harmlessly releases excess voltage to the circuit’s neutral wire rather than the ground wire, where it could still find its way to your audio components and cause damage.
– Unlike surge protection devices that use other suppression methods or “power conditioners,” the MPC1500’s suppression module is not sacrificial and will not need replacing after a surge event.
– Our blue Watt meters have been repurposed to show the real time incoming voltage and the actual current draw of the connected devices. (The meters will be scaled to the correct amperage and voltage based on the local country.)
– Available with either Type B1 (a.k.a. NEMA 5-15R) or Type F1 (a.k.a. CEE 7/3 or “Schuko”) receptacles.

ELECTRONIC SPECIFICATIONS:
– Load Regulation: ± 2.5 %
– Output Voltage:
– With Type B (a.k.a. NEMA 5-15R) receptacles:
120 Volts AC Nominal (100 Volts AC Nominal for Japan only)
– With Type F (a.k.a. CEE 7/3 or “Schuko”) receptacles:
230 Volts AC Nominal
– Power Requirement:
– With Type B (a.k.a. NEMA 5-15R) receptacles:
120 Volts ~60Hz (100 Volts ~50/60Hz for Japan only)
12.0 Amps (max)
1440 Watts (max) (1200 Watts (max) for Japan only)
– With Type F (a.k.a. CEE 7/3 or “Schuko”) receptacles:
230 Volts ~50/60Hz
6.0 Amps (max)
1380 Watts (max)

GENERAL SPECIFICATIONS:
AC Power Line Protection:Specially wound toroidal isolation transformer.
Surge Suppression Type: Quick-acting surge suppression module
Number of Receptacles:
– With Type B (a.k.a. NEMA 5-15R) receptacles:
6 medical grade duplex receptacles
– With Type F (a.k.a. CEE 7/3 or “Schuko”) receptacles:
6 high quality single receptacles
Number of Always ON Receptacles: 2
Meter Light Switch: Yes
Unit Dimensions (W x H x D):17-1/2″ (44.45cm) x 7-5/8″ (19.37cm) (including feet) x 22″ (55.88cm) (including front panel, knobs and cables)
Unit Weight:87 lbs (39.46 kg)
Shipping Weight: 105 lbs (47.63 kg)